Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mounting Holes | 0.535 in |
| Material | Cast Iron |
| Seal Material | Buna-N |
| Port Code | B |
| Port Size & Location | 1/2 in NPTF Side |
| Special Features Assembly Code | 0 |
| Mount Type | 2 Bolt |
| Shaft Type | Straight w/ Woodruff Key |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Series | H Series |
| Case Drain Code | 0 |
| Special Features Hardware Code | AA |
| Port Type | NPTF |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Output Shaft Code | 01 |
| Displacement (in³/rev) | 5.9 |
| Splines | 0 |
| Geroter/Geroler Options | Free Running |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features | Free Running Gerotor |
| Flange Orientation | Standard |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Corrosion Resistant | No |
| Case Drain | None |
| Rotation | Standard Rotation |
| Flow [Max] | 15 gal/min |
| Port Size | 1/2, 1/2-14 |
| Motor Type | Spool Valve |
| RPM [Min] | 585 rpm |
| Mounting Type Code | A |
| Pilot Diameter | 3.25 in |
| Flow Rate | 15 gal/min |
| Duty | Standard-Duty |
| Port Location | Side Port |
| Paint Code | A |
| Mounting Hole Size | 0.535 in |
| RPM [Max] | 585 rpm |
| Pressure [Max] | 1800 psi |
| Motor Element | Gerotor |
| Inlet Pressure [Max] | 2500 psi |
| Bolt Circle Dia. | 4.19 in |
| Weight | 13.0 LB |
