Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Pressure [Max] | 1800 psi |
| Special Features | Free Running Gerotor |
| Port Size | 1/2, 1/2-14 |
| Geroter/Geroler Options | Free Running |
| Rotation | Standard Rotation |
| Corrosion Resistant | No |
| Motor Type | Spool Valve |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Holes | 0.535 in |
| Flow [Max] | 15 gal/min |
| Port Size & Location | 1/2 in NPTF Side |
| Pilot Diameter | 3.25 in |
| Mounting Type Code | A |
| Mount Type | 2 Bolt |
| Duty | Standard-Duty |
| Port Location | Side Port |
| Output Shaft Code | 01 |
| Series | H Series |
| Special Features Hardware Code | AA |
| Splines | 0 |
| Port Code | B |
| Mounting Hole Size | 0.535 in |
| Case Drain | None |
| RPM [Max] | 760 rpm |
| Flange Orientation | Standard |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Motor Element | Gerotor |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Flow Rate | 15 gal/min |
| Paint Code | A |
| Material | Cast Iron |
| RPM [Min] | 760 rpm |
| Displacement (in³/rev) | 4.5 |
| Bolt Circle Dia. | 4.19 in |
| Case Drain Code | 0 |
| Shaft Type | Straight w/ Woodruff Key |
| Seal Material | Buna-N |
| Special Features Assembly Code | 0 |
| Port Type | NPTF |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Weight | 13.0 LB |
