
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
Output Shaft Code | 01 |
Rotation | Standard Rotation |
Bolt Circle Dia. | 4.19 in |
Motor Type | Spool Valve |
Case Drain | None |
Port Code | B |
RPM [Max] | 760 rpm |
Series | H Series |
Paint/Packaging | Low Gloss Black, Individual Box |
Port Type | NPTF |
Mounting Holes | 0.535 in |
Special Features Hardware Code | AA |
Displacement (in³/rev) | 4.5 |
Port Size | 1/2, 1/2-14 |
Mounting Hole Size | 0.535 in |
Special Features Assembly Code | 0 |
Splines | 0 |
Motor Element | Gerotor |
Geroter/Geroler Options | Free Running |
Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
RPM [Min] | 760 rpm |
Corrosion Resistant | No |
Flow [Max] | 15 gal/min |
Shaft Size & Type | 1 in x 1/4 in Straight |
Pressure [Max] | 1800 psi |
Special Features | Free Running Gerotor |
Port Location | Side Port |
Paint Code | A |
Pilot Diameter | 3.25 in |
Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
Case Drain Code | 0 |
Mount Type | 2 Bolt |
Material | Cast Iron |
Shaft Type | Straight w/ Woodruff Key |
Duty | Standard-Duty |
Flange Orientation | Standard |
Inlet Pressure [Max] | 2500 psi |
Mounting Type Code | A |
Flow Rate | 15 gal/min |
Seal Material | Buna-N |
Port Size & Location | 1/2 in NPTF Side |
Weight | 13.0 LB |
