Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Paint Code | A |
| Case Drain Code | 0 |
| RPM [Max] | 969 rpm |
| Geroter/Geroler Options | Free Running |
| Displacement (in³/rev) | 2.8 |
| Output Shaft Code | 01 |
| Flange Orientation | Standard |
| Shaft Type | Straight w/ Woodruff Key |
| Splines | 0 |
| Duty | Standard-Duty |
| Motor Type | Spool Valve |
| Corrosion Resistant | No |
| Seal Material | Buna-N |
| Port Size & Location | 1/2 in NPTF Side |
| Flow [Max] | 12 gal/min |
| Mounting Hole Size | 0.535 in |
| Case Drain | None |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Port Code | B |
| Port Size | 1/2, 1/2-14 |
| Motor Element | Gerotor |
| Inlet Pressure [Max] | 2500 psi |
| Rotation | Standard Rotation |
| Bolt Circle Dia. | 4.19 in |
| Mounting Holes | 0.535 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Series | H Series |
| Flow Rate | 12 gal/min |
| Pressure [Max] | 1800 psi |
| Special Features Assembly Code | 0 |
| Material | Cast Iron |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features | Free Running Gerotor |
| Special Features Hardware Code | AA |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Mounting Type Code | A |
| Pilot Diameter | 3.25 in |
| Port Location | Side Port |
| Mount Type | 2 Bolt |
| Port Type | NPTF |
| Weight | 13.0 LB |
