Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Rotation | Standard Rotation |
| Series | H Series |
| Duty | Standard-Duty |
| Output Shaft Code | 01 |
| Flange Orientation | Standard |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Type Code | A |
| Port Code | B |
| Port Location | Side Port |
| Flow Rate | 12 gal/min |
| Paint Code | A |
| Port Size | 1/2, 1/2-14 |
| Geroter/Geroler Options | Free Running |
| Special Features Assembly Code | 0 |
| Bolt Circle Dia. | 4.19 in |
| RPM [Max] | 969 rpm |
| Material | Cast Iron |
| Case Drain | None |
| Corrosion Resistant | No |
| Case Drain Code | 0 |
| Special Features Hardware Code | AA |
| Pressure [Max] | 1800 psi |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mount Type | 2 Bolt |
| Splines | 0 |
| Flow [Max] | 12 gal/min |
| Port Size & Location | 1/2 in NPTF Side |
| Port Type | NPTF |
| Pilot Diameter | 3.25 in |
| Inlet Pressure [Max] | 2500 psi |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Special Features | Free Running Gerotor |
| Mounting Hole Size | 0.535 in |
| Motor Element | Gerotor |
| Displacement (in³/rev) | 2.8 |
| Seal Material | Buna-N |
| Motor Type | Spool Valve |
| Shaft Type | Straight w/ Woodruff Key |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Mounting Holes | 0.535 in |
| Weight | 13.0 LB |
