Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mounting Hole Size | 0.535 in |
| Port Size & Location | SAE-10 Side |
| Output Shaft Code | 01 |
| Shaft Type | Straight w/ Woodruff Key |
| Flow Rate | 12 gal/min |
| Port Location | Side Port |
| Mount Type | 2 Bolt |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Pressure [Max] | 1800 psi |
| Special Features | Flange Rotated 90° |
| Seal Material | Buna-N |
| Rotation | Standard Rotation |
| Flow [Max] | 12 gal/min |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Mounting Holes | 0.535 in |
| Splines | 0 |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Case Drain | None |
| Special Features Hardware Code | 00 |
| Port Code | A |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flange Orientation | Flange Rotated 90° |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain Code | 0 |
| Series | H Series |
| Duty | Standard-Duty |
| Port Size | SAE-10, 7/8-14 UNF |
| RPM [Max] | 969 rpm |
| Material | Cast Iron |
| Paint Code | A |
| Corrosion Resistant | No |
| Port Type | SAE O-Ring |
| Mounting Type Code | A |
| Special Features Assembly Code | 2 |
| Pilot Diameter | 3.25 in |
| Motor Type | Spool Valve |
| Displacement (in³/rev) | 2.8 |
| Bolt Circle Dia. | 4.19 in |
| Motor Element | Gerotor |
| Weight | 13.0 LB |
