Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Code | A |
| Pressure [Max] | 1800 psi |
| Seal Material | Buna-N |
| Case Drain | None |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Flange Orientation | Flange Rotated 90° |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Pilot Diameter | 3.25 in |
| Flow Rate | 12 gal/min |
| Splines | 0 |
| Mounting Type Code | A |
| Port Type | SAE O-Ring |
| Series | H Series |
| Motor Element | Gerotor |
| Port Location | Side Port |
| Motor Type | Spool Valve |
| Flow [Max] | 12 gal/min |
| Port Size | SAE-10, 7/8-14 UNF |
| Inlet Pressure [Max] | 2500 psi |
| Corrosion Resistant | No |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features | Flange Rotated 90° |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Output Shaft Code | 01 |
| Special Features Assembly Code | 2 |
| Duty | Standard-Duty |
| Case Drain Code | 0 |
| Special Features Hardware Code | 00 |
| Rotation | Standard Rotation |
| Bolt Circle Dia. | 4.19 in |
| Shaft Type | Straight w/ Woodruff Key |
| Material | Cast Iron |
| Mounting Hole Size | 0.535 in |
| Displacement (in³/rev) | 2.8 |
| Mount Type | 2 Bolt |
| Mounting Holes | 0.535 in |
| RPM [Max] | 969 rpm |
| Port Size & Location | SAE-10 Side |
| Paint Code | A |
| Weight | 13.0 LB |
