Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Corrosion Resistant | No |
| Seal Material | Buna-N |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Motor Type | Spool Valve |
| Port Size & Location | 1/2 in NPTF Side |
| Special Features | Flange Rotated 90° |
| Port Type | NPTF |
| Bolt Circle Dia. | 4.19 in |
| Rotation | Standard Rotation |
| Flow Rate | 15 gal/min |
| Displacement (in³/rev) | 5.9 |
| Mounting Holes | 0.535 in |
| Case Drain Code | 0 |
| Pilot Diameter | 3.25 in |
| Flow [Max] | 15 gal/min |
| Case Drain | None |
| Splines | 0 |
| Shaft Type | Straight w/ Woodruff Key |
| Port Code | B |
| Series | H Series |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Mounting Type Code | A |
| Flange Orientation | Flange Rotated 90° |
| Pressure [Max] | 1800 psi |
| Motor Element | Gerotor |
| Mount Type | 2 Bolt |
| Port Location | Side Port |
| Output Shaft Code | 01 |
| Port Size | 1/2 |
| Paint Code | A |
| Mounting Hole Size | 0.535 in |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Assembly Code | 2 |
| Special Features Hardware Code | 00 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Duty | Standard-Duty |
| RPM [Max] | 585 rpm |
| Weight | 12.29 LB |
