Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Rotation | Standard Rotation |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Seal Material | Buna-N |
| Mounting Type Code | A |
| Port Type | NPTF |
| Special Features Hardware Code | 00 |
| RPM [Max] | 585 rpm |
| Corrosion Resistant | No |
| Mount Type | 2 Bolt |
| Special Features Assembly Code | 2 |
| Port Location | Side Port |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features | Flange Rotated 90° |
| Splines | 0 |
| Paint Code | A |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Duty | Standard-Duty |
| Mounting Hole Size | 0.535 in |
| Flange Orientation | Flange Rotated 90° |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Case Drain | None |
| Displacement (in³/rev) | 5.9 |
| Mounting Holes | 0.535 in |
| Inlet Pressure [Max] | 2500 psi |
| Motor Element | Gerotor |
| Flow Rate | 15 gal/min |
| Port Size & Location | 1/2 in NPTF Side |
| Series | H Series |
| Port Code | B |
| Motor Type | Spool Valve |
| Pilot Diameter | 3.25 in |
| Case Drain Code | 0 |
| Pressure [Max] | 1800 psi |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Port Size | 1/2 |
| Flow [Max] | 15 gal/min |
| Bolt Circle Dia. | 4.19 in |
| Output Shaft Code | 01 |
| Weight | 12.29 LB |
