Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 4.52 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Special Features Assembly Code | 2 |
| Case Drain | None |
| Special Features Hardware Code | 00 |
| Displacement (in³/rev) | 4.52 |
| Pilot Diameter | 3.25 in |
| Port Type | NPTF |
| Port Location | Side Port |
| Pressure [Max] | 1800 psi |
| Bolt Circle Dia. | 4.187 in |
| Mounting Hole Size | 0.565 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Paint Code | A |
| Flow [Max] | 15 gal/min |
| Special Features | Flange Rotated 90° |
| Splines | 0 |
| Series | H Series |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Mount Type | 2 Bolt |
| Flange Orientation | Flange Rotated 90° |
| RPM [Max] | 760 rpm |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Mounting Type Code | A |
| Duty | Standard-Duty |
| Port Size | 1/2 |
| Seal Material | Buna-N |
| Rotation | Standard Rotation |
| Inlet Pressure [Max] | 2500 psi |
| Port Code | B |
| Motor Type | Spool Valve |
| RPM [Min] | 760 rpm |
| Shaft Type | Straight w/ Woodruff Key |
| Flow Rate | 57 lpm |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Size & Location | 1/2 in NPTF Side |
| Output Shaft Code | 01 |
| Motor Element | Gerotor |
| Mounting Holes | 0.535 in |
| Material | Cast Iron |
| Corrosion Resistant | No |
| Case Drain Code | 0 |
| Weight | 13.0 LB |
