Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 4.52 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Pilot Diameter | 3.25 in |
| Special Features Assembly Code | 2 |
| Shaft Type | Straight w/ Woodruff Key |
| Paint Code | A |
| Port Location | Side Port |
| Series | H Series |
| Duty | Standard-Duty |
| Flow [Max] | 15 gal/min |
| RPM [Min] | 760 rpm |
| Case Drain Code | 0 |
| Motor Element | Gerotor |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Case Drain | None |
| Flow Rate | 57 lpm |
| Special Features Hardware Code | 00 |
| Splines | 0 |
| RPM [Max] | 760 rpm |
| Port Size | 1/2 |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Pressure [Max] | 1800 psi |
| Port Size & Location | 1/2 in NPTF Side |
| Port Type | NPTF |
| Displacement (in³/rev) | 4.52 |
| Inlet Pressure [Max] | 2500 psi |
| Output Shaft Code | 01 |
| Rotation | Standard Rotation |
| Seal Material | Buna-N |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Flange Orientation | Flange Rotated 90° |
| Corrosion Resistant | No |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mount Type | 2 Bolt |
| Mounting Hole Size | 0.565 in |
| Mounting Holes | 0.535 in |
| Material | Cast Iron |
| Mounting Type Code | A |
| Special Features | Flange Rotated 90° |
| Motor Type | Spool Valve |
| Bolt Circle Dia. | 4.187 in |
| Port Code | B |
| Weight | 13.0 LB |
