Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Mounting Type Code | A |
| Mount Type | 2 Bolt |
| Seal Material | Buna-N |
| Port Location | Side Port |
| Output Shaft Code | 01 |
| Special Features | None |
| Port Size | 1/2, 1/2-14 |
| Inlet Pressure [Max] | 2500 psi |
| Paint Code | A |
| Pilot Diameter | 3.25 in |
| Flow Rate | 12 gal/min |
| RPM [Min] | 969 rpm |
| Mounting Hole Size | 0.535 in |
| Mounting Holes | 0.535 in |
| Special Features Hardware Code | 00 |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Material | Cast Iron |
| Port Code | B |
| RPM [Max] | 969 rpm |
| Duty | Standard-Duty |
| Special Features Assembly Code | 0 |
| Motor Element | Gerotor |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Type | NPTF |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Flow [Max] | 12 gal/min |
| Case Drain Code | 1 |
| Flange Orientation | Standard |
| Splines | 0 |
| Displacement (in³/rev) | 2.8 |
| Corrosion Resistant | No |
| Series | H Series |
| Pressure [Max] | 1800 psi |
| Rotation | Standard Rotation |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Bolt Circle Dia. | 4.19 in |
| Port Size & Location | 1/2 in NPTF Side |
| Shaft Type | Straight w/ Woodruff Key |
| Motor Type | Spool Valve |
| Weight | 13.0 LB |
