Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Seal Material | Buna-N |
| Port Type | NPTF |
| Displacement (in³/rev) | 2.8 |
| Special Features | None |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Type Code | A |
| Output Shaft Code | 01 |
| Duty | Standard-Duty |
| Mounting Hole Size | 0.535 in |
| RPM [Max] | 969 rpm |
| Shaft Type | Straight w/ Woodruff Key |
| Port Size & Location | 1/2 in NPTF Side |
| Motor Element | Gerotor |
| Paint Code | A |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Flow Rate | 12 gal/min |
| Port Code | B |
| Pressure [Max] | 1800 psi |
| Pilot Diameter | 3.25 in |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Special Features Assembly Code | 0 |
| RPM [Min] | 969 rpm |
| Mounting Holes | 0.535 in |
| Material | Cast Iron |
| Port Location | Side Port |
| Bolt Circle Dia. | 4.19 in |
| Case Drain Code | 1 |
| Corrosion Resistant | No |
| Rotation | Standard Rotation |
| Flow [Max] | 12 gal/min |
| Mount Type | 2 Bolt |
| Flange Orientation | Standard |
| Splines | 0 |
| Series | H Series |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Port Size | 1/2, 1/2-14 |
| Motor Type | Spool Valve |
| Special Features Hardware Code | 00 |
| Weight | 13.0 LB |
