Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Rotation | Standard Rotation |
| Material | Cast Iron |
| Port Location | Side Port |
| Case Drain Code | 0 |
| Series | H Series |
| Special Features | None |
| Displacement (in³/rev) | 14.1 |
| Mount Type | 2 Bolt |
| Flow [Max] | 15 gal/min |
| Splines | 6 |
| Duty | Standard-Duty |
| Corrosion Resistant | No |
| Mounting Holes | 0.535 in |
| Special Features Assembly Code | 0 |
| Pressure [Max] | 1450 psi |
| Port Code | C |
| RPM [Max] | 243 rpm |
| Seal Material | Buna-N |
| Mounting Hole Size | 0.535 in |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Type Code | A |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Port Type | Manifold |
| Flange Orientation | Standard |
| Inlet Pressure [Max] | 2500 psi |
| Motor Element | Gerotor |
| Output Torque at Rated PSI (inch/pounds) | 2672.92 in lb |
| Pilot Diameter | 3.25 in |
| Motor Type | Spool Valve |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Flow Rate | 15 gal/min |
| Shaft Type | Splined |
| Special Features Hardware Code | 00 |
| Shaft Size & Type | 1 in - 6T Spline |
| Case Drain | None |
| Paint Code | A |
| Bolt Circle Dia. | 4.19 in |
| Output Shaft Code | 02 |
| Weight | 13.3 LB |
