Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Seal Material | Buna-N |
| Bolt Circle Dia. | 4.19 in |
| Series | H Series |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Port Location | Side Port |
| Duty | Standard-Duty |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Inlet Pressure [Max] | 2500 psi |
| Special Features | None |
| Splines | 6 |
| Special Features Assembly Code | 0 |
| Mounting Holes | 0.535 in |
| Shaft Type | Splined |
| Mount Type | 2 Bolt |
| Port Code | C |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Corrosion Resistant | No |
| Flow Rate | 15 gal/min |
| Pressure [Max] | 1450 psi |
| Output Shaft Code | 02 |
| Case Drain | None |
| Flow [Max] | 15 gal/min |
| RPM [Max] | 243 rpm |
| Material | Cast Iron |
| Displacement (in³/rev) | 14.1 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Motor Element | Gerotor |
| Rotation | Standard Rotation |
| Pilot Diameter | 3.25 in |
| Paint Code | A |
| Special Features Hardware Code | 00 |
| Shaft Size & Type | 1 in - 6T Spline |
| Case Drain Code | 0 |
| Mounting Hole Size | 0.535 in |
| Port Type | Manifold |
| Mounting Type Code | A |
| Output Torque at Rated PSI (inch/pounds) | 2672.92 in lb |
| Weight | 13.3 LB |
