Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC-2B Manifold Port
- 2.81 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Mounting Holes | 0.535 in |
| Mounting Type Code | A |
| Special Features | None |
| Output Torque at Rated PSI (inch/pounds) | 646 in lb |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Mount Type | 2 Bolt |
| Motor Type | Spool Valve |
| Flow [Max] | 12 gal/min |
| Series | H Series |
| Mounting Hole Size | 0.565 in |
| Shaft Type | Splined |
| Material | Cast Iron |
| RPM [Max] | 969 rpm |
| Case Drain | None |
| Special Features Assembly Code | 0 |
| Flange Orientation | Standard |
| Motor Element | Gerotor |
| Displacement (in³/rev) | 2.81 |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Paint Code | A |
| Port Code | C |
| Corrosion Resistant | No |
| RPM [Min] | 969 rpm |
| Port Location | Side Port |
| Flow Rate | 11.25 gal/min |
| Special Features Hardware Code | 00 |
| Rotation | Standard Rotation |
| Case Drain Code | 0 |
| Pressure [Max] | 1800 psi |
| Duty | Standard-Duty |
| Port Type | Manifold |
| Bolt Circle Dia. | 4.187 in |
| Seal Material | Buna-N |
| Output Shaft Code | 02 |
| Pilot Diameter | 3.25 in |
| Splines | 6 |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC-2B |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Size & Type | 1 in - 6T Spline |
| Weight | 11.2 LB |
