Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC-2B Manifold Port
- 2.81 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Flow [Max] | 12 gal/min |
| Paint Code | A |
| Mounting Holes | 0.535 in |
| Special Features Hardware Code | 00 |
| Output Torque at Rated PSI (inch/pounds) | 646 in lb |
| Splines | 6 |
| Motor Type | Spool Valve |
| Mounting Type Code | A |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC-2B |
| Displacement (in³/rev) | 2.81 |
| Flow Rate | 11.25 gal/min |
| Rotation | Standard Rotation |
| Pilot Diameter | 3.25 in |
| RPM [Min] | 969 rpm |
| Series | H Series |
| Port Location | Side Port |
| Material | Cast Iron |
| Bolt Circle Dia. | 4.187 in |
| Mounting Hole Size | 0.565 in |
| Case Drain Code | 0 |
| Shaft Type | Splined |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Corrosion Resistant | No |
| Pressure [Max] | 1800 psi |
| Shaft Size & Type | 1 in - 6T Spline |
| Inlet Pressure [Max] | 2500 psi |
| Port Type | Manifold |
| Output Shaft Code | 02 |
| Special Features Assembly Code | 0 |
| RPM [Max] | 969 rpm |
| Duty | Standard-Duty |
| Flange Orientation | Standard |
| Seal Material | Buna-N |
| Special Features | None |
| Mount Type | 2 Bolt |
| Motor Element | Gerotor |
| Case Drain | None |
| Port Code | C |
| Weight | 11.2 LB |
