Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Mounting Type Code | A |
| Port Type | SAE O-Ring |
| Corrosion Resistant | No |
| Flange Orientation | Standard |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain Code | 0 |
| Shaft Size & Type | 1 in - 6T Spline |
| Port Size | SAE-10, 7/8-14 UNF |
| Mounting Hole Size | 0.535 in |
| Port Size & Location | SAE-10 Side |
| Mount Type | 2 Bolt |
| Output Shaft Code | 02 |
| RPM [Max] | 152 rpm |
| Pilot Diameter | 3.25 in |
| Special Features Assembly Code | 0 |
| Flow [Max] | 15 gal/min |
| Seal Material | Buna-N |
| Port Location | Side Port |
| Flow Rate | 15 gal/min |
| Displacement (in³/rev) | 22.6 |
| Case Drain | None |
| Motor Type | Spool Valve |
| Bolt Circle Dia. | 4.19 in |
| Splines | 6 |
| Rotation | Standard Rotation |
| Port Code | A |
| Shaft Type | Splined |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Pressure [Max] | 1250 psi |
| Paint Code | A |
| Motor Element | Gerotor |
| Special Features | None |
| Duty | Standard-Duty |
| Series | H Series |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Material | Cast Iron |
| Mounting Holes | 0.535 in |
| Special Features Hardware Code | 00 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Weight | 14.7 LB |
