Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Code | A |
| Case Drain | None |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flow Rate | 15 gal/min |
| Duty | Standard-Duty |
| Mounting Hole Size | 0.535 in |
| Mount Type | 2 Bolt |
| Displacement (in³/rev) | 22.6 |
| Case Drain Code | 0 |
| Pilot Diameter | 3.25 in |
| Special Features Assembly Code | 0 |
| Port Type | SAE O-Ring |
| Flange Orientation | Standard |
| Flow [Max] | 15 gal/min |
| Pressure [Max] | 1250 psi |
| Special Features Hardware Code | 00 |
| Motor Element | Gerotor |
| Bolt Circle Dia. | 4.19 in |
| Inlet Pressure [Max] | 2500 psi |
| Output Shaft Code | 02 |
| Shaft Size & Type | 1 in - 6T Spline |
| Port Location | Side Port |
| Special Features | None |
| Seal Material | Buna-N |
| Material | Cast Iron |
| Series | H Series |
| RPM [Max] | 152 rpm |
| Shaft Type | Splined |
| Port Size | SAE-10, 7/8-14 UNF |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Mounting Holes | 0.535 in |
| Rotation | Standard Rotation |
| Mounting Type Code | A |
| Motor Type | Spool Valve |
| Paint Code | A |
| Corrosion Resistant | No |
| Port Size & Location | SAE-10 Side |
| Splines | 6 |
| Weight | 14.7 LB |
