Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Size | SAE-10, 7/8-14 UNF |
| Port Location | Side Port |
| Motor Element | Gerotor |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Seal Material | Buna-N |
| Port Code | A |
| Case Drain Code | 0 |
| Shaft Type | Splined |
| Duty | Standard-Duty |
| Mounting Holes | 0.535 in |
| Splines | 6 |
| Case Drain | None |
| RPM [Max] | 192 rpm |
| Output Torque at Rated PSI (inch/pounds) | 150.46 in lb |
| Flow [Max] | 15 gal/min |
| Mount Type | 2 Bolt |
| Flange Orientation | Standard |
| Rotation | Standard Rotation |
| Inlet Pressure [Max] | 2500 psi |
| Port Type | SAE O-Ring |
| Port Size & Location | SAE-10 Side |
| Displacement (in³/rev) | 17.9 |
| Motor Type | Spool Valve |
| Special Features Hardware Code | 00 |
| Pressure [Max] | 1350 psi |
| Series | H Series |
| Output Shaft Code | 02 |
| Bolt Circle Dia. | 4.19 in |
| Corrosion Resistant | No |
| Special Features Assembly Code | 0 |
| Special Features | None |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Paint Code | A |
| Mounting Type Code | A |
| Mounting Hole Size | 0.535 in |
| Pilot Diameter | 3.25 in |
| Material | Cast Iron |
| Shaft Size & Type | 1 in - 6T Spline |
| Flow Rate | 15 gal/min |
| Weight | 14.0 LB |
