Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Mount Type | 2 Bolt |
| Port Size & Location | SAE-10 Side |
| Flow Rate | 15 gal/min |
| Splines | 6 |
| RPM [Max] | 192 rpm |
| Duty | Standard-Duty |
| Pressure [Max] | 1350 psi |
| Material | Cast Iron |
| Seal Material | Buna-N |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Type | Splined |
| Mounting Hole Size | 0.535 in |
| Mounting Type Code | A |
| Case Drain | None |
| Paint Code | A |
| Rotation | Standard Rotation |
| Flow [Max] | 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 150.46 in lb |
| Inlet Pressure [Max] | 2500 psi |
| Port Code | A |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Output Shaft Code | 02 |
| Flange Orientation | Standard |
| Port Location | Side Port |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Displacement (in³/rev) | 17.9 |
| Pilot Diameter | 3.25 in |
| Port Size | SAE-10, 7/8-14 UNF |
| Motor Element | Gerotor |
| Shaft Size & Type | 1 in - 6T Spline |
| Special Features | None |
| Bolt Circle Dia. | 4.19 in |
| Series | H Series |
| Mounting Holes | 0.535 in |
| Case Drain Code | 0 |
| Port Type | SAE O-Ring |
| Weight | 14.0 LB |
