Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Code | A |
| Series | H Series |
| Special Features | None |
| Inlet Pressure [Max] | 2500 psi |
| Port Location | Side Port |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flow Rate | 15 gal/min |
| Mounting Type Code | A |
| Mounting Holes | 0.535 in |
| Displacement (in³/rev) | 14.1 |
| RPM [Max] | 243 rpm |
| Output Shaft Code | 02 |
| Pressure [Max] | 1450 psi |
| Port Size | SAE-10, 7/8-14 UNF |
| Rotation | Standard Rotation |
| Port Size & Location | SAE-10 Side |
| Port Type | SAE O-Ring |
| Pilot Diameter | 3.25 in |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Material | Cast Iron |
| Mounting Hole Size | 0.535 in |
| Special Features Hardware Code | 00 |
| Case Drain Code | 0 |
| Shaft Type | Splined |
| Mount Type | 2 Bolt |
| Flange Orientation | Standard |
| Motor Type | Spool Valve |
| Shaft Size & Type | 1 in - 6T Spline |
| Flow [Max] | 15 gal/min |
| Duty | Standard-Duty |
| Seal Material | Buna-N |
| Splines | 6 |
| Special Features Assembly Code | 0 |
| Output Torque at Rated PSI (inch/pounds) | 2672.92 in lb |
| Paint Code | J |
| Motor Element | Gerotor |
| Case Drain | None |
| Bolt Circle Dia. | 4.19 in |
| Corrosion Resistant | No |
| Weight | 13.3 LB |
