Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Flange Orientation | Standard |
| Special Features | None |
| Special Features Hardware Code | 00 |
| Mounting Holes | 0.535 in |
| Pilot Diameter | 3.25 in |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Type | SAE O-Ring |
| Port Location | Side Port |
| Displacement (in³/rev) | 14.1 |
| Series | H Series |
| Mounting Hole Size | 0.535 in |
| Special Features Assembly Code | 0 |
| Case Drain | None |
| Flow [Max] | 15 gal/min |
| Shaft Type | Splined |
| Motor Element | Gerotor |
| Material | Cast Iron |
| Corrosion Resistant | No |
| Port Size | SAE-10, 7/8-14 UNF |
| Splines | 6 |
| Motor Type | Spool Valve |
| Port Code | A |
| Port Size & Location | SAE-10 Side |
| Mounting Type Code | A |
| Seal Material | Buna-N |
| Case Drain Code | 0 |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Duty | Standard-Duty |
| Mount Type | 2 Bolt |
| Pressure [Max] | 1450 psi |
| Rotation | Standard Rotation |
| Output Shaft Code | 02 |
| Flow Rate | 15 gal/min |
| Paint Code | J |
| RPM [Max] | 243 rpm |
| Shaft Size & Type | 1 in - 6T Spline |
| Output Torque at Rated PSI (inch/pounds) | 2672.92 in lb |
| Inlet Pressure [Max] | 2500 psi |
| Bolt Circle Dia. | 4.19 in |
| Weight | 13.3 LB |
