Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Shaft Size & Type | 1 in - 6T Spline |
| Seal Material | Buna-N |
| Mounting Holes | 0.535 in |
| Duty | Standard-Duty |
| Port Size & Location | SAE-10 Side |
| Motor Type | Spool Valve |
| Inlet Pressure [Max] | 2500 psi |
| Port Code | A |
| Special Features Hardware Code | 00 |
| RPM [Max] | 353 rpm |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flow [Max] | 15 gal/min |
| Case Drain Code | 0 |
| Mounting Type Code | A |
| Splines | 6 |
| Bolt Circle Dia. | 4.19 in |
| Flow Rate | 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Case Drain | None |
| Shaft Type | Splined |
| Output Shaft Code | 02 |
| Pilot Diameter | 3.25 in |
| Displacement (in³/rev) | 9.7 |
| Mounting Hole Size | 0.535 in |
| Special Features Assembly Code | 0 |
| Series | H Series |
| Paint Code | A |
| Port Location | Side Port |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Rotation | Standard Rotation |
| Flange Orientation | Standard |
| Mount Type | 2 Bolt |
| Special Features | None |
| Material | Cast Iron |
| Motor Element | Gerotor |
| Corrosion Resistant | No |
| Port Size | SAE-10, 7/8-14 UNF |
| Port Type | SAE O-Ring |
| Pressure [Max] | 1650 psi |
| Weight | 12.5 LB |
