Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Code | A |
| Flow [Max] | 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Bolt Circle Dia. | 4.19 in |
| Pilot Diameter | 3.25 in |
| Port Type | SAE O-Ring |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Type | Splined |
| Seal Material | Buna-N |
| Splines | 6 |
| Rotation | Standard Rotation |
| Mounting Hole Size | 0.535 in |
| Corrosion Resistant | No |
| Mounting Type Code | A |
| Case Drain Code | 0 |
| Paint Code | A |
| Port Size | SAE-10, 7/8-14 UNF |
| Material | Cast Iron |
| Flow Rate | 15 gal/min |
| Case Drain | None |
| Special Features Hardware Code | 00 |
| Mount Type | 2 Bolt |
| RPM [Max] | 585 rpm |
| Port Location | Side Port |
| Flange Orientation | Standard |
| Special Features | None |
| Pressure [Max] | 1800 psi |
| RPM [Min] | 585 rpm |
| Displacement (in³/rev) | 5.9 |
| Motor Element | Gerotor |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Series | H Series |
| Port Size & Location | SAE-10 Side |
| Mounting Holes | 0.535 in |
| Special Features Assembly Code | 0 |
| Shaft Size & Type | 1 in - 6T Spline |
| Duty | Standard-Duty |
| Motor Type | Spool Valve |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Output Shaft Code | 02 |
| Weight | 11.8 LB |
