Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Pressure [Max] | 1800 psi |
| Pilot Diameter | 3.25 in |
| RPM [Min] | 585 rpm |
| Bolt Circle Dia. | 4.19 in |
| Shaft Size & Type | 1 in - 6T Spline |
| Shaft Type | Splined |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Flow Rate | 15 gal/min |
| Mounting Holes | 0.535 in |
| Mount Type | 2 Bolt |
| Output Shaft Code | 02 |
| Motor Type | Spool Valve |
| Motor Element | Gerotor |
| Special Features | None |
| Port Location | Side Port |
| Flange Orientation | Standard |
| Port Type | SAE O-Ring |
| Material | Cast Iron |
| Series | H Series |
| Port Size | SAE-10, 7/8-14 UNF |
| Flow [Max] | 15 gal/min |
| Displacement (in³/rev) | 5.9 |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Type Code | A |
| Paint Code | A |
| Corrosion Resistant | No |
| Case Drain | None |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Rotation | Standard Rotation |
| Splines | 6 |
| Mounting Hole Size | 0.535 in |
| Port Code | A |
| Special Features Hardware Code | 00 |
| Special Features Assembly Code | 0 |
| Case Drain Code | 0 |
| Duty | Standard-Duty |
| RPM [Max] | 585 rpm |
| Port Size & Location | SAE-10 Side |
| Seal Material | Buna-N |
| Weight | 11.8 LB |
