Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 SAE O-Ring Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Flow Rate | 15 gal/min |
| Port Size & Location | SAE-10 Side |
| Inlet Pressure [Max] | 2500 psi |
| Pressure [Max] | 1800 psi |
| RPM [Min] | 760 rpm |
| Case Drain | None |
| Paint Code | A |
| Port Size | SAE-10, 7/8-14 |
| Pilot Diameter | 3.25 in |
| Splines | 6 |
| Port Location | Side Port |
| Series | H Series |
| Motor Type | Spool Valve |
| Bolt Circle Dia. | 4.19 in |
| Displacement (in³/rev) | 4.5 |
| Rotation | Standard Rotation |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Case Drain Code | 0 |
| Motor Element | Gerotor |
| Mounting Hole Size | 0.535 in |
| Special Features Hardware Code | 00 |
| Mount Type | 2 Bolt |
| Flow [Max] | 15 gal/min |
| Mounting Holes | 0.535 in |
| Special Features Assembly Code | 0 |
| Port Type | SAE O-Ring |
| Duty | Standard-Duty |
| Port Code | A |
| Shaft Size & Type | 1 in - 6T Spline |
| RPM [Max] | 760 rpm |
| Seal Material | Buna-N |
| Special Features | None |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Corrosion Resistant | No |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Flange Orientation | Standard |
| Output Shaft Code | 02 |
| Material | Cast Iron |
| Shaft Type | Splined |
| Mounting Type Code | A |
| Weight | 11.5 LB |
