Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 SAE O-Ring Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Special Features | None |
| Splines | 6 |
| Special Features Assembly Code | 0 |
| Material | Cast Iron |
| Series | H Series |
| Bolt Circle Dia. | 4.19 in |
| Paint Code | A |
| Port Location | Side Port |
| Inlet Pressure [Max] | 2500 psi |
| Mount Type | 2 Bolt |
| Flange Orientation | Standard |
| Mounting Holes | 0.535 in |
| Displacement (in³/rev) | 4.5 |
| RPM [Min] | 760 rpm |
| Port Code | A |
| Case Drain | None |
| Rotation | Standard Rotation |
| Port Type | SAE O-Ring |
| Mounting Hole Size | 0.535 in |
| Pressure [Max] | 1800 psi |
| Port Size | SAE-10, 7/8-14 |
| Corrosion Resistant | No |
| Seal Material | Buna-N |
| Motor Type | Spool Valve |
| Motor Element | Gerotor |
| Port Size & Location | SAE-10 Side |
| Case Drain Code | 0 |
| RPM [Max] | 760 rpm |
| Shaft Type | Splined |
| Special Features Hardware Code | 00 |
| Mounting Type Code | A |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Pilot Diameter | 3.25 in |
| Shaft Size & Type | 1 in - 6T Spline |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Flow [Max] | 15 gal/min |
| Output Shaft Code | 02 |
| Duty | Standard-Duty |
| Flow Rate | 15 gal/min |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Weight | 11.5 LB |
