Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Material | Cast Iron |
| Seal Material | Buna-N |
| Inlet Pressure [Max] | 2500 psi |
| Mount Type | 2 Bolt |
| Rotation | Standard Rotation |
| Corrosion Resistant | No |
| Flange Orientation | Standard |
| Port Size | SAE-10, 7/8-14 UNF |
| Special Features | None |
| Flow [Max] | 12 gal/min |
| Case Drain Code | 0 |
| Mounting Type Code | A |
| Motor Type | Spool Valve |
| RPM [Min] | 969 rpm |
| Pressure [Max] | 1800 psi |
| Flow Rate | 12 gal/min |
| Output Shaft Code | 02 |
| Mounting Hole Size | 0.535 in |
| Paint Code | A |
| Bolt Circle Dia. | 4.19 in |
| Shaft Size & Type | 1 in - 6T Spline |
| Splines | 6 |
| Case Drain | None |
| Mounting Holes | 0.535 in |
| Pilot Diameter | 3.25 in |
| Port Code | A |
| Port Type | SAE O-Ring |
| Series | H Series |
| Port Size & Location | SAE-10 Side |
| Port Location | Side Port |
| Special Features Assembly Code | 0 |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Special Features Hardware Code | 00 |
| Motor Element | Gerotor |
| Paint/Packaging | Low Gloss Black, Individual Box |
| RPM [Max] | 969 rpm |
| Duty | Standard-Duty |
| Shaft Type | Splined |
| Displacement (in³/rev) | 2.8 |
| Weight | 11.2 LB |
