
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
Motor Element | Gerotor |
Port Size | SAE-10, 7/8-14 UNF |
Rotation | Standard Rotation |
Port Size & Location | SAE-10 Side |
Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
Output Shaft Code | 02 |
Paint/Packaging | Low Gloss Black, Individual Box |
Pilot Diameter | 3.25 in |
Corrosion Resistant | No |
Series | H Series |
Case Drain Code | 0 |
Shaft Type | Splined |
Port Location | Side Port |
Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
Mount Type | 2 Bolt |
Port Type | SAE O-Ring |
Special Features | None |
Flow [Max] | 12 gal/min |
Special Features Assembly Code | 0 |
Inlet Pressure [Max] | 2500 psi |
Duty | Standard-Duty |
Bolt Circle Dia. | 4.19 in |
Mounting Hole Size | 0.535 in |
Mounting Holes | 0.535 in |
Pressure [Max] | 1800 psi |
Splines | 6 |
Flange Orientation | Standard |
Paint Code | A |
Special Features Hardware Code | 00 |
Flow Rate | 12 gal/min |
Port Code | A |
Mounting Type Code | A |
Seal Material | Buna-N |
Displacement (in³/rev) | 2.8 |
RPM [Min] | 969 rpm |
RPM [Max] | 969 rpm |
Motor Type | Spool Valve |
Material | Cast Iron |
Shaft Size & Type | 1 in - 6T Spline |
Case Drain | None |
Weight | 11.2 LB |
