Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 22.6 |
| Port Size | 1/2, 1/2-14 |
| Bolt Circle Dia. | 4.19 in |
| Motor Type | Spool Valve |
| Paint Code | A |
| Flow [Max] | 15 gal/min |
| Port Code | B |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Hardware Code | 00 |
| Shaft Size & Type | 1 in - 6T Spline |
| Seal Material | Buna-N |
| Material | Cast Iron |
| Mount Type | 2 Bolt |
| Output Shaft Code | 02 |
| Motor Element | Gerotor |
| Special Features | None |
| Splines | 6 |
| Pressure [Max] | 1250 psi |
| RPM [Min] | 152 rpm |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Hole Size | 0.535 in |
| Shaft Type | Splined |
| Corrosion Resistant | No |
| Duty | Standard-Duty |
| Pilot Diameter | 3.25 in |
| Special Features Assembly Code | 0 |
| Port Location | Side Port |
| Port Type | NPTF |
| Mounting Holes | 0.535 in |
| Output Torque at Rated PSI (inch/pounds) | 194.72 in lb |
| RPM [Max] | 152 rpm |
| Mounting Type Code | A |
| Flow Rate | 15 gal/min |
| Case Drain Code | 0 |
| Port Size & Location | 1/2 in NPTF Side |
| Series | H Series |
| Case Drain | None |
| Flange Orientation | Standard |
| Weight | 14.7 LB |
