Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Mounting Holes | 0.535 in |
| Output Torque at Rated PSI (inch/pounds) | 194.72 in lb |
| Port Size & Location | 1/2 in NPTF Side |
| Pressure [Max] | 1250 psi |
| Seal Material | Buna-N |
| Flange Orientation | Standard |
| Bolt Circle Dia. | 4.19 in |
| Mounting Hole Size | 0.535 in |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 3.25 in |
| Port Code | B |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Duty | Standard-Duty |
| Special Features Assembly Code | 0 |
| Series | H Series |
| Shaft Type | Splined |
| Port Location | Side Port |
| Motor Type | Spool Valve |
| Mounting Type Code | A |
| Case Drain | None |
| Flow Rate | 15 gal/min |
| Splines | 6 |
| Paint Code | A |
| Material | Cast Iron |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features | None |
| Motor Element | Gerotor |
| Port Size | 1/2, 1/2-14 |
| Output Shaft Code | 02 |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 22.6 |
| Flow [Max] | 15 gal/min |
| RPM [Min] | 152 rpm |
| Port Type | NPTF |
| Case Drain Code | 0 |
| Mount Type | 2 Bolt |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Shaft Size & Type | 1 in - 6T Spline |
| RPM [Max] | 152 rpm |
| Weight | 14.7 LB |
