Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Special Features | None |
| Special Features Assembly Code | 0 |
| Port Size & Location | 1/2 in NPTF Side |
| Duty | Standard-Duty |
| Seal Material | Buna-N |
| Mount Type | 2 Bolt |
| Shaft Size & Type | 1 in - 6T Spline |
| Port Location | Side Port |
| Inlet Pressure [Max] | 2500 psi |
| Displacement (in³/rev) | 9.7 |
| Mounting Holes | 0.535 in |
| Pilot Diameter | 3.25 in |
| RPM [Min] | 353 rpm |
| Port Size | 1/2, 1/2-14 |
| Material | Cast Iron |
| Corrosion Resistant | No |
| Flow [Max] | 15 gal/min |
| Output Shaft Code | 02 |
| Shaft Type | Splined |
| Motor Element | Gerotor |
| Case Drain | None |
| Flange Orientation | Standard |
| Mounting Hole Size | 0.535 in |
| RPM [Max] | 353 rpm |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Port Code | B |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Mounting Type Code | A |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features Hardware Code | 00 |
| Motor Type | Spool Valve |
| Bolt Circle Dia. | 4.19 in |
| Case Drain Code | 0 |
| Series | H Series |
| Paint Code | A |
| Port Type | NPTF |
| Rotation | Standard Rotation |
| Pressure [Max] | 1650 psi |
| Splines | 6 |
| Flow Rate | 15 gal/min |
| Weight | 12.5 LB |
