Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Series | H Series |
| Shaft Type | Splined |
| RPM [Min] | 353 rpm |
| Special Features Assembly Code | 0 |
| Corrosion Resistant | No |
| Pilot Diameter | 3.25 in |
| Mounting Type Code | A |
| Inlet Pressure [Max] | 2500 psi |
| Paint Code | A |
| Port Type | NPTF |
| Port Code | B |
| Port Size & Location | 1/2 in NPTF Side |
| Mount Type | 2 Bolt |
| Seal Material | Buna-N |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Output Shaft Code | 02 |
| Duty | Standard-Duty |
| Flow Rate | 15 gal/min |
| Motor Element | Gerotor |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Special Features | None |
| Mounting Hole Size | 0.535 in |
| Mounting Holes | 0.535 in |
| Displacement (in³/rev) | 9.7 |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| RPM [Max] | 353 rpm |
| Material | Cast Iron |
| Flange Orientation | Standard |
| Special Features Hardware Code | 00 |
| Splines | 6 |
| Case Drain Code | 0 |
| Bolt Circle Dia. | 4.19 in |
| Motor Type | Spool Valve |
| Port Size | 1/2, 1/2-14 |
| Port Location | Side Port |
| Case Drain | None |
| Rotation | Standard Rotation |
| Shaft Size & Type | 1 in - 6T Spline |
| Flow [Max] | 15 gal/min |
| Pressure [Max] | 1650 psi |
| Weight | 12.5 LB |
