Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Material | Cast Iron |
| Flow Rate | 15 gal/min |
| Paint Code | A |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Special Features Hardware Code | 00 |
| Flange Orientation | Standard |
| Flow [Max] | 15 gal/min |
| Mounting Holes | 0.535 in |
| Output Shaft Code | 02 |
| Port Size & Location | 1/2 in NPTF Side |
| Port Location | Side Port |
| Inlet Pressure [Max] | 2500 psi |
| Pressure [Max] | 1800 psi |
| Motor Element | Gerotor |
| Bolt Circle Dia. | 4.19 in |
| Displacement (in³/rev) | 4.5 |
| RPM [Max] | 760 rpm |
| Port Code | B |
| Mounting Hole Size | 0.535 in |
| Seal Material | Buna-N |
| Corrosion Resistant | No |
| Case Drain | None |
| Motor Type | Spool Valve |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Type | Splined |
| Mount Type | 2 Bolt |
| Port Size | 1/2, 1/2-14 |
| Port Type | NPTF |
| Special Features | None |
| RPM [Min] | 760 rpm |
| Duty | Standard-Duty |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Rotation | Standard Rotation |
| Series | H Series |
| Special Features Assembly Code | 0 |
| Mounting Type Code | A |
| Splines | 6 |
| Case Drain Code | 0 |
| Shaft Size & Type | 1 in - 6T Spline |
| Pilot Diameter | 3.25 in |
| Weight | 11.5 LB |
