Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Displacement (in³/rev) | 4.5 |
| Flow Rate | 15 gal/min |
| Port Size & Location | 1/2 in NPTF Side |
| Seal Material | Buna-N |
| Case Drain | None |
| Corrosion Resistant | No |
| Port Size | 1/2, 1/2-14 |
| Series | H Series |
| Output Shaft Code | 02 |
| RPM [Min] | 760 rpm |
| Case Drain Code | 0 |
| Rotation | Standard Rotation |
| Port Location | Side Port |
| Bolt Circle Dia. | 4.19 in |
| Duty | Standard-Duty |
| Inlet Pressure [Max] | 2500 psi |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Paint Code | A |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| RPM [Max] | 760 rpm |
| Pressure [Max] | 1800 psi |
| Special Features Hardware Code | 00 |
| Motor Element | Gerotor |
| Splines | 6 |
| Mounting Type Code | A |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Material | Cast Iron |
| Special Features Assembly Code | 0 |
| Flange Orientation | Standard |
| Port Type | NPTF |
| Mounting Holes | 0.535 in |
| Pilot Diameter | 3.25 in |
| Mounting Hole Size | 0.535 in |
| Shaft Type | Splined |
| Motor Type | Spool Valve |
| Flow [Max] | 15 gal/min |
| Port Code | B |
| Mount Type | 2 Bolt |
| Shaft Size & Type | 1 in - 6T Spline |
| Special Features | None |
| Weight | 11.5 LB |
