Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Pilot Diameter | 3.25 in |
| Special Features Hardware Code | 00 |
| Flow Rate | 12 gal/min |
| Seal Material | Buna-N |
| Motor Element | Gerotor |
| Flange Orientation | Standard |
| Output Shaft Code | 02 |
| Port Code | B |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Pressure [Max] | 1800 psi |
| Series | H Series |
| Port Size & Location | 1/2 in NPTF Side |
| RPM [Max] | 969 rpm |
| Shaft Size & Type | 1 in - 6T Spline |
| Port Size | 1/2, 1/2-14 |
| Port Location | Side Port |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Special Features | None |
| Inlet Pressure [Max] | 2500 psi |
| Rotation | Standard Rotation |
| Mount Type | 2 Bolt |
| Motor Type | Spool Valve |
| Displacement (in³/rev) | 2.8 |
| Mounting Holes | 0.535 in |
| Mounting Hole Size | 0.535 in |
| Mounting Type Code | A |
| Port Type | NPTF |
| Duty | Standard-Duty |
| Flow [Max] | 12 gal/min |
| Bolt Circle Dia. | 4.19 in |
| RPM [Min] | 969 rpm |
| Shaft Type | Splined |
| Case Drain | None |
| Special Features Assembly Code | 0 |
| Paint Code | A |
| Corrosion Resistant | No |
| Splines | 6 |
| Case Drain Code | 0 |
| Material | Cast Iron |
| Weight | 11.2 LB |
