Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Rotation | Standard Rotation |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Special Features Assembly Code | 0 |
| Port Size & Location | 1/2 in NPTF Side |
| Paint Code | A |
| Shaft Size & Type | 1 in - 6T Spline |
| Bolt Circle Dia. | 4.19 in |
| Special Features Hardware Code | 00 |
| Output Shaft Code | 02 |
| Case Drain Code | 0 |
| RPM [Max] | 969 rpm |
| Mounting Holes | 0.535 in |
| Splines | 6 |
| Special Features | None |
| Material | Cast Iron |
| Mounting Hole Size | 0.535 in |
| Pilot Diameter | 3.25 in |
| Mount Type | 2 Bolt |
| Port Location | Side Port |
| Shaft Type | Splined |
| Port Type | NPTF |
| Seal Material | Buna-N |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Pressure [Max] | 1800 psi |
| Corrosion Resistant | No |
| Duty | Standard-Duty |
| Motor Type | Spool Valve |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Mounting Type Code | A |
| Port Code | B |
| Inlet Pressure [Max] | 2500 psi |
| Flow [Max] | 12 gal/min |
| Series | H Series |
| Flow Rate | 12 gal/min |
| Motor Element | Gerotor |
| Case Drain | None |
| Displacement (in³/rev) | 2.8 |
| Flange Orientation | Standard |
| RPM [Min] | 969 rpm |
| Port Size | 1/2, 1/2-14 |
| Weight | 11.2 LB |
