Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC-2B Manifold Port
- 22.58 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Material | Cast Iron |
| Pilot Diameter | 1.75 in |
| Motor Type | Spool Valve |
| Corrosion Resistant | No |
| Inlet Pressure [Max] | 2500 psi |
| Flange Orientation | Standard |
| Paint Code | A |
| Seal Material | Buna-N |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Case Drain Code | 0 |
| Shaft Size & Type | 1 in - 6T Spline |
| RPM [Min] | 152 rpm |
| Pressure [Max] | 1250 psi |
| Rotation | Standard Rotation |
| Mount Type | 4 Bolt |
| Output Shaft Code | 02 |
| Shaft Type | Splined |
| Duty | Standard-Duty |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC-2B |
| Port Type | Manifold |
| Mounting Type Code | B |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| Flow Rate | 14 gal/min |
| Special Features Assembly Code | 0 |
| Special Features | None |
| Bolt Circle Dia. | 3 1/4 in |
| Case Drain | None |
| Splines | 6 |
| Flow [Max] | 15 gal/min |
| RPM [Max] | 152 rpm |
| Mounting Holes | 3/8-16 |
| Mounting Hole Size | 3/8 in |
| Port Location | Side Port |
| Port Code | C |
| Special Features Hardware Code | 00 |
| Motor Element | Gerotor |
| Displacement (in³/rev) | 22.58 |
| Series | H Series |
| Weight | 14.7 LB |
