Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC-2B Manifold Port
- 22.58 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Rotation | Standard Rotation |
| Pilot Diameter | 1.75 in |
| Pressure [Max] | 1250 psi |
| Port Code | C |
| Paint Code | A |
| Corrosion Resistant | No |
| Duty | Standard-Duty |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| Bolt Circle Dia. | 3 1/4 in |
| Motor Element | Gerotor |
| Mount Type | 4 Bolt |
| Seal Material | Buna-N |
| Flow Rate | 14 gal/min |
| RPM [Min] | 152 rpm |
| Case Drain | None |
| RPM [Max] | 152 rpm |
| Material | Cast Iron |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC-2B |
| Motor Type | Spool Valve |
| Series | H Series |
| Shaft Size & Type | 1 in - 6T Spline |
| Mounting Type Code | B |
| Port Location | Side Port |
| Displacement (in³/rev) | 22.58 |
| Flange Orientation | Standard |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Shaft Type | Splined |
| Special Features | None |
| Case Drain Code | 0 |
| Splines | 6 |
| Port Type | Manifold |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Output Shaft Code | 02 |
| Special Features Hardware Code | 00 |
| Mounting Holes | 3/8-16 |
| Flow [Max] | 15 gal/min |
| Mounting Hole Size | 3/8 in |
| Special Features Assembly Code | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Weight | 14.7 LB |
