Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Special Features Assembly Code | 0 |
| Series | H Series |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Case Drain | None |
| Special Features | None |
| Material | Cast Iron |
| Seal Material | Buna-N |
| Flow Rate | 15 gal/min |
| Mount Type | 4 Bolt |
| Inlet Pressure [Max] | 2500 psi |
| Output Shaft Code | 02 |
| Shaft Type | Splined |
| Port Location | Side Port |
| RPM [Max] | 192 rpm |
| RPM [Min] | 192 rpm |
| Shaft Size & Type | 1 in - 6T Spline |
| Case Drain Code | 0 |
| Corrosion Resistant | No |
| Splines | 6 |
| Special Features Hardware Code | 00 |
| Port Code | C |
| Motor Element | Gerotor |
| Mounting Holes | 3/8-16 |
| Pressure [Max] | 1350 psi |
| Duty | Standard-Duty |
| Mounting Type Code | B |
| Bolt Circle Dia. | 3 1/4 in |
| Flange Orientation | Standard |
| Output Torque at Rated PSI (inch/pounds) | 3106.61 in lb |
| Paint Code | A |
| Pilot Diameter | 1.75 in |
| Displacement (in³/rev) | 17.9 |
| Flow [Max] | 15 gal/min |
| Mounting Hole Size | 3/8 in |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Motor Type | Spool Valve |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Port Type | Manifold |
| Rotation | Standard Rotation |
| Weight | 13.85 LB |
