Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| RPM [Min] | 192 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Hole Size | 3/8 in |
| Port Location | Side Port |
| Seal Material | Buna-N |
| Rotation | Standard Rotation |
| Flow Rate | 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 3106.61 in lb |
| Material | Cast Iron |
| Duty | Standard-Duty |
| Mounting Holes | 3/8-16 |
| Mounting Type Code | B |
| Pilot Diameter | 1.75 in |
| Port Type | Manifold |
| Flow [Max] | 15 gal/min |
| Output Shaft Code | 02 |
| Case Drain | None |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Series | H Series |
| Port Code | C |
| Shaft Size & Type | 1 in - 6T Spline |
| RPM [Max] | 192 rpm |
| Shaft Type | Splined |
| Case Drain Code | 0 |
| Corrosion Resistant | No |
| Special Features | None |
| Displacement (in³/rev) | 17.9 |
| Mount Type | 4 Bolt |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Special Features Hardware Code | 00 |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Motor Element | Gerotor |
| Splines | 6 |
| Paint Code | A |
| Bolt Circle Dia. | 3 1/4 in |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Pressure [Max] | 1350 psi |
| Special Features Assembly Code | 0 |
| Weight | 13.85 LB |
