Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC-2B Manifold Port
- 4.52 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Displacement (in³/rev) | 4.52 |
| Pressure [Max] | 1800 psi |
| Inlet Pressure [Max] | 2500 psi |
| Bolt Circle Dia. | 3 1/4 in |
| Port Location | Side Port |
| Mounting Hole Size | 3/8 in |
| Mounting Holes | 3/8-16 |
| Pilot Diameter | 1.75 in |
| Shaft Type | Splined |
| Rotation | Standard Rotation |
| Case Drain | None |
| Special Features | None |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Motor Type | Spool Valve |
| RPM [Min] | 760 rpm |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Series | H Series |
| Case Drain Code | 0 |
| Flow Rate | 14 gal/min |
| Special Features Assembly Code | 0 |
| Output Shaft Code | 02 |
| Seal Material | Buna-N |
| Motor Element | Gerotor |
| Paint Code | A |
| Port Code | C |
| Mounting Type Code | B |
| Special Features Hardware Code | 00 |
| Mount Type | 4 Bolt |
| Splines | 6 |
| RPM [Max] | 760 rpm |
| Flow [Max] | 15 gal/min |
| Port Type | Manifold |
| Duty | Standard-Duty |
| Corrosion Resistant | No |
| Flange Orientation | Standard |
| Material | Cast Iron |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC-2B |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Shaft Size & Type | 1 in - 6T Spline |
| Weight | 11.5 LB |
