Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC-2B Manifold Port
- 4.52 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Location | Side Port |
| Displacement (in³/rev) | 4.52 |
| Port Type | Manifold |
| Special Features Hardware Code | 00 |
| Motor Element | Gerotor |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Paint Code | A |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Series | H Series |
| Inlet Pressure [Max] | 2500 psi |
| Bolt Circle Dia. | 3 1/4 in |
| Special Features | None |
| Corrosion Resistant | No |
| Port Code | C |
| Splines | 6 |
| Motor Type | Spool Valve |
| RPM [Max] | 760 rpm |
| Flow [Max] | 15 gal/min |
| Case Drain Code | 0 |
| Mount Type | 4 Bolt |
| Material | Cast Iron |
| Duty | Standard-Duty |
| Seal Material | Buna-N |
| Shaft Type | Splined |
| Case Drain | None |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Mounting Type Code | B |
| Pressure [Max] | 1800 psi |
| Rotation | Standard Rotation |
| Special Features Assembly Code | 0 |
| Flow Rate | 14 gal/min |
| Shaft Size & Type | 1 in - 6T Spline |
| Output Shaft Code | 02 |
| Mounting Hole Size | 3/8 in |
| Pilot Diameter | 1.75 in |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC-2B |
| Flange Orientation | Standard |
| RPM [Min] | 760 rpm |
| Mounting Holes | 3/8-16 |
| Weight | 11.5 LB |
