Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Mount Type | 4 Bolt |
| Special Features Hardware Code | 00 |
| Mounting Hole Size | 3/8 in |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Case Drain Code | 0 |
| Rotation | Standard Rotation |
| Special Features | None |
| Bolt Circle Dia. | 3 1/4 in |
| Shaft Size & Type | 1 in - 6T Spline |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Mounting Holes | 3/8-16 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Seal Material | Buna-N |
| Mounting Type Code | B |
| Material | Cast Iron |
| Shaft Type | Splined |
| Port Location | Side Port |
| Case Drain | None |
| Flow [Max] | 12 gal/min |
| Port Type | Manifold |
| Displacement (in³/rev) | 2.8 |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Min] | 969 rpm |
| Pilot Diameter | 1.75 in |
| Flow Rate | 12 gal/min |
| Special Features Assembly Code | 0 |
| Series | H Series |
| Flange Orientation | Standard |
| Corrosion Resistant | No |
| Splines | 6 |
| Duty | Standard-Duty |
| Motor Element | Gerotor |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Motor Type | Spool Valve |
| Paint Code | A |
| Pressure [Max] | 1800 psi |
| Output Shaft Code | 02 |
| RPM [Max] | 969 rpm |
| Port Code | C |
| Weight | 11.2 LB |
