Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Shaft Size & Type | 1 in - 6T Spline |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Pilot Diameter | 1.75 in |
| Seal Material | Buna-N |
| Splines | 6 |
| Bolt Circle Dia. | 3 1/4 in |
| RPM [Min] | 969 rpm |
| Rotation | Standard Rotation |
| Mounting Hole Size | 3/8 in |
| Series | H Series |
| Port Type | Manifold |
| Mounting Holes | 3/8-16 |
| Material | Cast Iron |
| Special Features Hardware Code | 00 |
| Case Drain Code | 0 |
| Mount Type | 4 Bolt |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain | None |
| Motor Type | Spool Valve |
| Motor Element | Gerotor |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flow [Max] | 12 gal/min |
| Special Features | None |
| Paint Code | A |
| Port Location | Side Port |
| Flow Rate | 12 gal/min |
| Port Code | C |
| Flange Orientation | Standard |
| Shaft Type | Splined |
| Output Shaft Code | 02 |
| Pressure [Max] | 1800 psi |
| Special Features Assembly Code | 0 |
| Displacement (in³/rev) | 2.8 |
| Duty | Standard-Duty |
| Corrosion Resistant | No |
| RPM [Max] | 969 rpm |
| Mounting Type Code | B |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Weight | 11.2 LB |
