Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| RPM [Max] | 585 rpm |
| Shaft Size & Type | 1 in - 6T Spline |
| Output Shaft Code | 02 |
| Flange Orientation | Standard |
| RPM [Min] | 585 rpm |
| Motor Type | Spool Valve |
| Case Drain Code | 0 |
| Rotation | Standard Rotation |
| Corrosion Resistant | No |
| Mount Type | 4 Bolt |
| Duty | Standard-Duty |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Inlet Pressure [Max] | 2500 psi |
| Paint Code | A |
| Flow [Max] | 15 gal/min |
| Mounting Holes | 3/8-16 |
| Pilot Diameter | 1.75 in |
| Port Type | SAE O-Ring |
| Material | Cast Iron |
| Shaft Type | Splined |
| Port Size | SAE-10, 7/8-14 UNF |
| Pressure [Max] | 1800 psi |
| Series | H Series |
| Case Drain | None |
| Special Features | None |
| Bolt Circle Dia. | 3 1/4 in |
| Mounting Type Code | B |
| Displacement (in³/rev) | 5.9 |
| Port Size & Location | SAE-10 Side |
| Port Location | Side Port |
| Splines | 6 |
| Motor Element | Gerotor |
| Flow Rate | 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Mounting Hole Size | 3/8 in |
| Special Features Hardware Code | 00 |
| Seal Material | Buna-N |
| Port Code | A |
| Special Features Assembly Code | 0 |
| Weight | 11.8 LB |
