Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Material | Cast Iron |
| Series | H Series |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Corrosion Resistant | No |
| Displacement (in³/rev) | 5.9 |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Bolt Circle Dia. | 3 1/4 in |
| Duty | Standard-Duty |
| Special Features Assembly Code | 0 |
| Port Size & Location | SAE-10 Side |
| Motor Element | Gerotor |
| Mounting Holes | 3/8-16 |
| Flow Rate | 15 gal/min |
| Mounting Type Code | B |
| Special Features | None |
| Port Location | Side Port |
| Rotation | Standard Rotation |
| Mount Type | 4 Bolt |
| Flow [Max] | 15 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Paint Code | A |
| Splines | 6 |
| Port Code | A |
| Motor Type | Spool Valve |
| Shaft Type | Splined |
| Case Drain | None |
| Special Features Hardware Code | 00 |
| Pressure [Max] | 1800 psi |
| Case Drain Code | 0 |
| Port Size | SAE-10, 7/8-14 UNF |
| RPM [Max] | 585 rpm |
| RPM [Min] | 585 rpm |
| Output Shaft Code | 02 |
| Port Type | SAE O-Ring |
| Shaft Size & Type | 1 in - 6T Spline |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Seal Material | Buna-N |
| Flange Orientation | Standard |
| Mounting Hole Size | 3/8 in |
| Pilot Diameter | 1.75 in |
| Weight | 11.8 LB |
