Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 4.52 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Duty | Standard-Duty |
| Mounting Type Code | B |
| Series | H Series |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Rotation | Standard Rotation |
| Pressure [Max] | 1800 psi |
| Pilot Diameter | 1.75 in |
| Bolt Circle Dia. | 3 1/4 in |
| Case Drain | None |
| Special Features | None |
| Case Drain Code | 0 |
| Port Type | SAE O-Ring |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Output Shaft Code | 02 |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Shaft Size & Type | 1 in - 6T Spline |
| RPM [Max] | 760 rpm |
| Motor Element | Gerotor |
| Mount Type | 4 Bolt |
| Mounting Hole Size | 3/8 in |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Inlet Pressure [Max] | 2500 psi |
| Seal Material | Buna-N |
| RPM [Min] | 760 rpm |
| Mounting Holes | 3/8-16 |
| Displacement (in³/rev) | 4.52 |
| Port Code | A |
| Motor Type | Spool Valve |
| Paint Code | A |
| Special Features Assembly Code | 0 |
| Material | Cast Iron |
| Flow Rate | 14 gal/min |
| Splines | 6 |
| Shaft Type | Splined |
| Port Size & Location | SAE-10 Side |
| Flow [Max] | 15 gal/min |
| Flange Orientation | Standard |
| Port Location | Side Port |
| Weight | 11.5 LB |
