Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 4.52 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Case Drain | None |
| Bolt Circle Dia. | 3 1/4 in |
| Mounting Type Code | B |
| Rotation | Standard Rotation |
| Duty | Standard-Duty |
| Flow Rate | 14 gal/min |
| Port Type | SAE O-Ring |
| RPM [Max] | 760 rpm |
| Mounting Hole Size | 3/8 in |
| Special Features Assembly Code | 0 |
| Port Size & Location | SAE-10 Side |
| Mount Type | 4 Bolt |
| Shaft Size & Type | 1 in - 6T Spline |
| Splines | 6 |
| Series | H Series |
| Displacement (in³/rev) | 4.52 |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Motor Type | Spool Valve |
| Material | Cast Iron |
| Corrosion Resistant | No |
| RPM [Min] | 760 rpm |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Flange Orientation | Standard |
| Pressure [Max] | 1800 psi |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 1.75 in |
| Special Features | None |
| Paint Code | A |
| Flow [Max] | 15 gal/min |
| Shaft Type | Splined |
| Mounting Holes | 3/8-16 |
| Special Features Hardware Code | 00 |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Case Drain Code | 0 |
| Output Shaft Code | 02 |
| Port Location | Side Port |
| Seal Material | Buna-N |
| Motor Element | Gerotor |
| Port Code | A |
| Weight | 11.5 LB |
